Hydraulic systems are a vital part of many types of equipment and can make the difference between success and failure. Choosing the right hydraulic hose material is essential to ensure proper function and performance. The three basic parts of a hydraulic hose include an inner tube, reinforcement layer and outer cover. The inner tube is designed to transport the liquid it carries, while the reinforcement layer offers strength and pressure-resistant bearing.

Braided hose

A braided hose is a type of industrial hose that has been reinforced with a cording or wire. The cording or wire may be woven together in a crisscross pattern, or it might run parallel to the tubing. In either case, it increases the strength and longevity of the hose. It also helps the hose meet any safety standards that apply to a particular industry or setting. Braided hoses are suitable for a variety of applications, including off-highway equipment and heavy duty machinery. They are often reinforced with two steel wire braids, although they can have more layers. They can be used for medium to high pressure applications and are resistant to temperature, abrasion and corrosion. Industrial hoses are available at most of the world’s top hydraulic hose suppliers. These companies offer a full range of hydraulic and industrial hoses, as well as a vast selection of fittings to fabricate hose assemblies on demand. They also provide a friendly walk-in service that can handle many repairs in a short amount of time.

Thermoplastic hose

Thermoplastic hoses offer both flexibility and durability. They can be bent and flexed to maneuver into position, but are extremely durable because of the polypropylene outer helix. They can also withstand extreme temperatures and environmental conditions. They are also available in a variety of colors and laylines, as well as in a non-conductive style for use with electrical applications. These hoses are capable of handling high pressure applications with minimal expansion, resulting in fewer leak points. They also offer greater resistance to abrasion and temperature fluctuations than traditional rubber hoses. They also feature a wider range of fluid compatibility and are available in single, twin, or bonded constructions with multiple lines up to 10 hoses wide. In addition, they can withstand a 4:1 burst pressure to working pressure ratio. This makes them ideal for fork lift and man-lift applications. Thermoplastic hoses can also be fabricated into continuous lengths that are up to twice as long as wire-reinforced rubber hoses.

Nitrile rubber hose

Industrial businesses, commercial industries and construction workers rely on heavy-duty equipment to get the job done. This equipment includes various types of hoses for different applications. From PVC hoses for plumbing and irrigation to rubber hydraulic hoses for oil transfer, the right hose can help you complete your project quickly and efficiently. Nitrile (NBR) rubber has excellent resistance to petroleum products, making it the best option for fuel transfer hose. Its resistance to gasoline and lubricants depends on the acrylonitrile content, which can range from 18% to 50%. It is not suitable for aromatic hydrocarbons or ozone. SBR, a copolymer of styrene and butadiene, is a good alternative to NR. Its properties are similar to those of natural rubber but with improved low temperature flexibility. It has good resistance to water, air and some chemicals. However, it has poor resistance to petroleum-based oils and fuels, which can cause it to swell or weaken. It is also not ozone or weather resistant.

Polyurethane hose

Polyurethane tubing is a highly stretchable material that provides flexibility and resistance to heat, cracking and puncture. It is also resistant to mold and other chemicals, making it an excellent choice for applications that require harsh environments. It can be used in a variety of industrial applications, from pneumatic tool tubing to weld spatter tubes. PU pneumatic hose is a great option for many conveyance applications, from dry powders and granules to liquids and gases. It has outstanding kink and abrasion resistance and can withstand much lower temperatures than PVC hoses. It can also handle many different chemicals and fluids, including kerosene, paraffin and tall oils, although these may require field testing in some cases. Distributor of standard & custom abrasion, chemical, oil, impulse, high pressure spray painting & thermoplastic hydraulic hoses with high tensile synthetic two braid and aramid reinforcements. Includes steel helix, fire proof sleeve and abrasion resistant cover. Up to 58,000 psi working pressure.